This is the “Simple Pot 2 Spiral” designed by me.

You can print it for normal plants or use my inner pot for selfwatering.

Standard Dimensions:

• inner Diameter at the top: 90mm
• inner Diameter at the bottom: 63.7mm
• inner height: 78mm
• wallthikness: 1.2mm

Settings:

• layer height: 0.2mm
• line width: 0.42mm
• wall loops: 3
• infill: 100%

Note:

As you scale the pot the wall thickness will also change and water could leak. Feel free to contact me for other diameters!

Feel free to upload your Makes!