If you want a commercial license, check out my bio and get it from Patreon.

I use my old thinker purge bin design for my A1 and A1mini, but after both of this printer move to smaller table, I was not able to fit them in the same space with AMS on the side. So I was looking for some smaller bin design compare to my thinker purge bin.

But I did not see anything that I like, it either have logo or text on it. More importantly I want something to match the style for both A1 and A1mini that sits together. So, why not spend few minutes to design my own.

From this:

To this:

This print takes around 3h5m on A1, around 120g of filaments.

Dimension: L199mm x W125mm x H100mm. Wall thickness 1.35mm. It is overkill for the application, but I just want something solid.

It needs to work with the purge guide to get the best result.

So the design started with the idea to having both A1 and A1mini as a set. I want simple, minimalist, and will do the job - holding poop.

All the curves and round are designed to be have a cohesive look with a1/a1 mini.

Design is simple part, but measuring takes me a while.

I have added a feature on the gantry bean area. This feature will help holding the bin stay in place from resonance

Take a few test and revisions to make it fits perfectly.