its made to sit as the picture for the file.  

Yedoggie

Yes, I see it now. How could I think it that way at first. :-) Any how I'm happy with it. 

Chippie777

Nice detailed engine stand. However it is a little bit too wide to fit the engine nicely. (it now "hits" the screws) Should be nice if the stands are 3 to 5 mm closer to each other. Never the less, happy with the result.

well done design, the perfect finish for my jet engine build.  Thank you!

ffpdfirefighter2002

I ended up having to perform a cut due to bed size, it fit but wouldn't print due to supports in one section.  the cut version printed great and really adds that extra level of detail to the jet engine model.  I also love the idea of the TPU non slip pads.  I couldn't get the pegs to fit but did have some M3x16 bolts on hand (M3x20 if you want a little more bolt for the nut to screw onto), fitment is a little loose so you may be able to do an M4x16 or 20 as well

0.2mm layer, 2 walls, 15% infill

gefällt mir sehr gut, vielen Dank für ihre Arbeit 

BiMein

Thor

Perfect alternative Stand- thank you 👍

PrinterDan84

BrianM

iamwhoiam

Narrenkoenig

bastian123f

Would it be possible to change the licence type to "CC"? I have designed a Version with a touch-sensor and ESP + Motor for my own, but i wanted to share this as a remix of your work.

cover

IMG_20240127_232927805_HDR_6299590f-ae61-4987-8f2a-797485e186f5.jpg

IMG_20240127_225700237_HDR_fbe13085-a8ac-41d4-9f09-9047a305c978.jpg

IMG_20240127_230141655_HDR_49a7a4b3-6943-4da3-913c-620f2ed86f55.webp

IMG_20240127_225700237_HDR_e922ae27-8319-4a74-86da-6d547955a113.webp

IMG_20240127_232927805_HDR_a251363f-3aa2-488d-af61-30d1d82169f4.webp

plate_1.png

plate_2.png

plate_3.png

IMG_5470_4d89a431-1c29-4915-a553-3028716b5c44.webp

plate_1.webp

plate_2.webp

plate_3.webp

<p>I performed a cut on this due to adding in manual tree supports for the long bridge section to give a nice clean finish. &nbsp;due to the overall size, this put the tree supports outside of the print area requiring it to be cut. &nbsp;This profile includes the cut model with associated pegs to reassemble the two halves back together. &nbsp;The stand was printed in a yellow PLA with black TPU non-slip pads on the engine supports. &nbsp;Walls were slowed down to 50mm/s for a much smoother finish. &nbsp;The pegs to attach the engine supports didnt fit for me so I finished mine off with M3x16 bolts (could use M3x20 if you want a slightly protruding bolt beyond the nut. &nbsp;You could also try an M4 bolt to see if its a snugger fit but the M3 worked fine for me. &nbsp;Enjoy!</p>

0.2mm layer, 3 walls, 15% infill

Stand for 3DjetEngine - mod

<p>I modified <a target="_blank" href="https://www.thingiverse.com/lefyo" rel="nofollow noopener">yohann LEFEUVRE</a> design by adding TPU to the Patins (Pads) so that the Jet engine sitting on there would not slip easily when you are rotating the compressor.  THe original design was good but did not hold the jet engine well when fidgeting with it.  The whole jet engine would slip and roll on you.  By printing a TPU pad and gluing on the Patin, it greatly helps preventing any unwanted movements.</p>

Print Profile(2)

Description

Comment & Rating (30)

This remix is based on

License

Remixes (1)