Here is a lithophane for a Siberian Husky

I am now uploading two versions.

• No Base: It has a 3mm thickness and a 3mm border around it.

I have had issues with my print not staying stable and wobbling a bit towards the top of the print.

• Has Base: It has a 3mm thickness and a 3mm border around it. Add a base of 7mm which makes the total base of 3mm (thickness) + 7mm (base added) = 10mm

The inclusion of a base has benefits;

• more stable print towards the top

• Its now a free standing print, leave by the window

• you can put your contact info at bottle of base but not affect image

My printing dimensions;

• height is 75% of width

Thus, if the width if 120mm, then the height I use would be 90mm.

• I like printing my pictures standing up, I personally think it looks better. I tried printing a image flat....it looked very very bad. I personally will not try it again.

• I suggest using 100% infill to remove as many air gaps as possible, you do not really use much material anyway.

• You should use a brim to print this, I tried a raft but because the image is tall, it was not able to stand up straight and the print failed.

I am the owner of https://www.neocrisis.com