ZEND SLIDER (Awesome Utility Knife) Remixed by dylcro2

Remixed by

dylcro2

Tools>Hand Tools

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

3 walls, 20% infill

Designer

31 min

1 plate

4.8(40)

Boost

147

263

355

Released

Description

So I uploaded the Utility Knife (Perfect fit Blade) last month and it was very popular.

Now ive done my own. This one now has a nicer grip, my own custom brand design and a cut out in the slider so you can fit it on a keyring!

Print profile good to go. DOWNLOAD AND PRINT!

Body is made 1mm longer to prevent the tip of the blade sticking out for safety. I have used another remix design for the slider as the blade fits perfect in this one. Handy utility knife for DIY and for you 3d printing projects.

WARNING- SHARP OBJECT! PLEASE PRINT AND USE AT YOUR OWN RISK, THIS IS NOT A HEAVY DUTY UTILITY KNIFE.

Will fit all common utility knife blades.

Assembly- Install the blade in the holder and slide in from the back side of the body to the front. If movement is slightly stiff, dab a minute amount of Bambu Lubricant Oil in the top and bottom body rails to help glide.

Full credit goes to original designer - Talon Utility Knife by HallPrecision - Thingiverse

Happy Printing! :)

Comment & Rating (46)

@pandirajangopi1

Does not really work for me maybe i slised it wrong

(Edited)

The designer has replied

@dylcro2

try the optimal setting… 0.16mm

@dcappello

Print Profile

3 walls, 20% infill

Printed perfect using Bambu PLA Tough - highly functional, thank you for sharing.

@user_3690324577

Print Profile

3 walls, 20% infill

Printed good with PLA. A little tight but after sliding it a few time it started to loosen up! excuse my picture it ain't dirty it's just leftover petg from previous print.

@whowantstoknowi

Print Profile

3 walls, 20% infill

👍

@laser_mike

Print Profile

3 walls, 20% infill

great little keychain utility knife . awesome job

@dgauche

Print Profile

3 walls, 20% infill

Great print! No issues

@tetsuo.kin69

Print Profile

3 walls, 20% infill

Kept having problems with out knife loosing the blade or not working, printed this, Put it together and it's a great handy tool for us while we craft... Printed 4 of them now so i've always got one laying around somewhere...

@raymc57

Print Profile

3 walls, 20% infill

(Edited)

@user_3924381806

Print Profile

3 walls, 20% infill

great

@dkbarrante

Is anyone else having issues with the inside piece not sliding well into the outside piece? I have printed multiple versions of this type of holder, and they never fit together Used PLA and PLA on a P1P

(Edited)

The designer has replied

@dylcro2

They should slide perfectly try the optimal setting 0.16