A 2-part version of my swirled lamp shade.
Its as easy to print as my other lamp shades and also does not need any support like the others. Orient both parts updisde down and hit print. Set the seam alignment to random for a better result.
I added a testprint which only prints the interface part between top and bottom so you can check whether you'll need to calibrate your filament or not for a seamless result between base and top part.
You'll also need the LED Hardware Kit 001 adapter and the Hardware Kit 001 itself. You can find a print profile of the adapter on this page, or you can download it from the official Bambu Labs account. I altered the bajonette adapter for a quite tight fit. You will need some force to get it into place, but it will fit tight and snug.
I used Bambu Lab PLA Matte White for this lamp shade. PLA Marble will also look very nice on it. Get creative with translucent or gradient filaments to achieve other nice effects.
0.2mm layer height
2 walls
22% gyroid infill
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.