Heart of Hearts 'Pin Art' Inspired Fidget Toys (2 sizes) by 3DPmom

3DPmom

Toys & Games>Other Toys & Games

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Large & Small Heart of Hearts 0.2mm layer, 2 walls, 15% infill

Designer

10.5 h

4 plates

5.0(2)

[Small/Large]: 0.2mm layer, 2 walls, 15% infill

5 h

2 plates

5.0(6)

Boost

116

171

136

Released

Description

These are ‘Pin Art’ inspired heart-shaped fidget toys. I designed two sizes: a Large Heart of Hearts and a Small Heart of Hearts.

I would recommend starting with the small heart (which takes about an hour and a half) and then try the large heart. I found the small heart printed great on my A1 with all the ‘mini’ hearts sticking nicely during print and moving freely within the print afterwards. Just in case you print it and the ‘mini’ hearts are hard to move (or stuck/fused) - I also designed a second file for each size that has more tolerance (+.1mm tolerance).

So in my print profile you will find:

Plate #1: Small Heart of Hearts

Plate #2: Small Heart of Hearts (+.1mm tolerance)

Plate #3: Large Heart of Hearts

Plate #4: Large Heart of Hearts (+.1mm tolerance)

For the Large Heart I would recommend pre-treating the print bed with a glue stick (or hair spray) to ensure good adhesion - particularly for the ‘mini’ hearts inside the main heart. There are 51 ‘mini’ hearts and I found when I didn’t use a glue stick, some of my prints would have one or two mini hearts that would become loose before the print was done (which wasn’t catastrophic, just gave them a little rougher finish). Using a glue stick solved that problem for me:)

3D PRINTING SETTINGS

Layer Height 0.2mm

PLA works great

15-20% Infill

No supports

Dimensions of Large Heart: 3.75 in. x 3.5 in

Dimensions of Small Heart: 2.5 in. x 2.25 in.

These are a lot of fun to play with and I think make great little Valentine’s Day gifts ❤️

Have fun printing!

Comment & Rating (11)

@kitqnxqxp

Print Profile

[Small/Large]: 0.2mm layer, 2 walls, 15% infill

Small one printed perfectly in PLA. No fused parts.

(Edited)

@dudeman2871

It was very easy to break this into objects and print the hearts in a different color. I was able to choose a different color per object (each heart is an object on it's own). Absolutely no issues printing it with PLA. I dried it first for better results.

@bethiness

Print Profile

[Small/Large]: 0.2mm layer, 2 walls, 15% infill

So cute!! love it!! thank you.

@zeee3d

Print Profile

[Small/Large]: 0.2mm layer, 2 walls, 15% infill

Really cool model and print.

@swisha

Print Profile

[Small/Large]: 0.2mm layer, 2 walls, 15% infill

(Edited)

@jambabydesigns

The small one printed flawlessly for me. And it is so fun to play with!! I will be printing more.

The designer has replied

@3DPmom

🙌🏼 I think they are a lot of fun too!

@tinacoffeencats

Print Profile

Large & Small Heart of Hearts 0.2mm layer, 2 walls, 15% infill

OBSESSED!!!! thank you!

@Ellipse

Print Profile

Large & Small Heart of Hearts 0.2mm layer, 2 walls, 15% infill

Fun figet, my kids like them.

@Viktor623

Print Profile

[Small/Large]: 0.2mm layer, 2 walls, 15% infill

@user_3216237685

Print Profile

[Small/Large]: 0.2mm layer, 2 walls, 15% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.