Inspired By Steam Punk Space Race of The 60's Great Display Piece And Functional Lamp ! ONLY LED BULBS, Articulates and also you can design your own ends for it to change up what it holds (Cell phone, different lamp end, ect.)
With This lamp project, there are many different parts to print, i alternated copper PLA, and Black PLA, feel free to express your self with what ever colors you like !!
Printed In Seperate Parts So No Need For AMS
Lamp Height when fully extended is 17" and base diameter is 6"
PLEASE READ BELOW SPECIAL INSTRUCTIONS:
-ONLY USE AN LED BULB !
-Only Have Some One Who Can Safely Install Plug End On Lamp Cord
-All parts are printed with no supports, although depending on your build plate adhesions if its not good,. i would print the "Lamp Bottom Bracket Final" with a brim or raft. And The "Lamp Middle Hinge Spacer Final"
-The "Lamp Top Hinge Knob Final" and "Lamp Middle Hinge Knob Final" are designed with supports built in. Once printing is done they will need to be removed from where the bolt goes in.
Please See In Photos For What I Used.
If you would like to make a different end (maybe to hold a cell phone) or for a different lamp socket. The part that will fit in between the end of the lamp bracket needs to be 20MM Wide With A 9.6-10mm hole to fit the 3/8 Bolt
If You Cant purchase the Globe Brand Light Socket as listed above, and you are un able to design your own please let me know and i can help out :)
For Assembly Check out the GIF Video.
Additional Info (Print QTYS)
LAMP BASE FINAL X 1
LAMP BASE GEAR FINAL X 1
LAMP BASE GEAR PLATE FINAL X 1
LAMP BASE KNOB FINAL (7% Scale Up) X 1
LAMP BOTTOM BRACKET FINAL X 1
LAMP KNOB CAPS X 4
LAMP MIDDLE HINGE FINAL X
LAMP MIDDLE HINGE KNOBS FINAL X 2
LAMP MIDDLE HINGE FINAL X 1
LAMP TOP BRACKET FINAL X 2
LAMP TOP HINGE KNOB FINAL X 1
LAMP TOP HINGE SOCKET FINAL X 1
If there are any questions please let me know and im happy to help ! enjoy !