Let me present you with my latest creation. I was tired of letting my sponge on the side of the sink and I got inspired by one of the products on Aliexpress. I decided to give it a try and design it in Fusion 360. My goal was to design it for easy printing. You can print it without supports due to the 45°degrees angle. Also, you should be able to print it on any printer with a minimal build volume of 215x115x140 mm. So if you have Ender 3, Prusa i3, P1 series of printers, or any other printer with at least this volume. Print time is around 30 hours for all 3 parts (0.15mm layer height and 60mm/s)

The design is simple, just print all parts in colors and materials of your own choice and then the "Box" and "drip tray" will slide easily into the main body. When the drip tray is full, you can just easily pour it out. If you want to make sure, that it will not leak, you can apply wood glue and let it dry.

Please let me know if you have any issues with the model and share your results with others :)