Hueforge that was inspired by classic Portuguese / Dutch tiles , I chose to go for the much used blue colour style.

If you use the included print profile all settings are configured correctly (colorswaps, infill, layerheights…)

If you download the STL please use these settings :

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #14 (0.72mm) swap to Blue
At layer #23 (1.08mm) swap to Jade White for the rest.
 

ps : if you want to rescale the image : make sure the Z-height doesn't change.

Be sure to check out my other models and/or give me a follow :)

More info about the inspiration :

https://en.wikipedia.org/wiki/Azulejo

https://commons.wikimedia.org/wiki/Category:Delftware_tiles