Magnetic moving Piston Keychain by Chris1974

Chris1974

Hobby & DIY>Vehicles

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

Piston key 0.2mm layer, 3 walls, 15% infill

Designer

43 min

2 plates

4.8(40)

Boost

131

185

317

311

Released

Description

Edit: I added a solid Piston for people that don't want to add the magnet.

Never lose your keys again with this little magnetic keychain shaped like an engine piston.

Use it to keep your keys where you can find them again.

Stick them on the fridge or your toolbox or anything else metal.

Never lose your keys again!

Just print the file, assemble it and insert one 10mm diameter magnet (3 or 5 mm thick) in the piston head and presto!

Magnets needed: https://www.amazon.com/VSKIZ-Refrigerator-Muti-use-Neodymium-Whiteboard/dp/B0BVY5VYQY

For real motorheads and gasmonkeys.

Also works as a nice refrigerator magnet of course!

Comment & Rating (45)

@Lamics

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

scaled to 75% with a 0.2 nozzle, perfect!

The designer has replied

@Chris1974

Looks awsome!

@user_1250625297

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

made a bunch of them. prints easy but had a very tight fit for the magnet. had to melt it a bit. so next batch I printed at 100.5% worked perfectly

(Edited)

The designer has replied

@Chris1974

instead of scaling the piece you can also set "x-y hole compensation" to 0.1 to enlarge the hole.

@Carnyx

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

Cool

@CYBR3D

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

Great model! I printed it both with my X1-C and my Ender V-2 Neo. No issues at all with either. Thank You for the great add !

@stevenboiro

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

I like this piston keyring a lot! The profile worked well in my A1 Mini. But in the one prepared for the magnets, i had to bebel a little bit so i could introduce 2 10x2mm magnets (the ones i had) . For better adhesion i also applied a little bit of cyanoacrilate, and it seems good and strong. Thanks!

@alfo_daniello

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

perfect tight

(Edited)

@motomoosetech

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

both came out great, pops preferred the non magnetic one.

@Robjohnsilvers

Print Profile

Piston key 0.2mm layer, 3 walls, 15% infill

The designer has replied

@Chris1974

Nice one!

@jdominic712

I’ll boost your design if you make it a1 mini compatible

The designer has replied

@Chris1974

I didn't know it wasn't compatible. Can't you just change the bed to get it on the A1 mini? Hoe does that work? I don't have a mini to try it. I know I can print things for the A1 mini on my X1C just by changing to the correct printer.

(Edited)