Print this in addition to Bambu's heatbed cable protector to protect both the top and the bottom heatbed cable connection sites from excessive bending which can lead to cable failure.
This is a clip on bed cable support I designed for the Bambu Lab A1 printer. This clips on to the back of the bed in between the power cable and the top of the heat bed. Attach the cable support from the bottom angled as shown in the last picture above and pull it up to clip on to the top of the heat bed with the clips on each side of the power cable. Use a small zip tie to secure the cable to the cable support with the hole on the bottom. This design does need supports to print on the top clips. As this clips on to the heatbed, PETG is the better material to use for this clip rather than PLA. I have tested this design to ensure it does not interfere with printing.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.