Mario with Princess Hueforge
Copyright Claim
Mario with Princess Hueforge
Boost
17
17
2
Print Profile(1)
4 colors 0.08mm layer, 2 walls, 15% infill
Designer
4.9 h
1 plate
Boost
17
17
2
0
37
18
Released
Description
Super Mario and his Princess! 👸
If you have AMS just use one of the provided print profile
You can resize X and Y axis, but Z must remain unchanged
Swap Instructions (if you do not have AMS):
Start with black PLA Basic | Bambu Lab EU
At layer #13 (1.16mm) swap to Gray PLA Basic Filament with spool / 1kg / Black (10101) | Bambu Lab EU
At layer #23 (1.96mm) swap to Silver PLA Basic Filament with spool / 1kg / Gray (10103) | Bambu Lab EU
At layer #34 (2.84mm) swap to White for the rest PLA Basic Filament with spool / 1kg / Black (10101) | Bambu Lab EU
Comment & Rating (2)
All
Print Profile
4 colors 0.08mm layer, 2 walls, 15% infill
Très jolie image, rendu incroyable. Je crois que je vais investir dans le logiciel Hueforge .
(Edited)
0
Reply
Print Profile
4 colors 0.08mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld