iPhone 14 Pro max case
Copyright Claim
iPhone 14 Pro max case
Boost
29
61
29
Print Profile(1)
0.16mm layer, 3 walls, 25% infill
Designer
59 min
1 plate
Boost
29
61
29
0
334
207
Released
Description
iphone 14 pro max case
Comment & Rating (29)
All
Print Profile
0.16mm layer, 3 walls, 25% infill
good design, fit ok
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
printed and fitted perfectly
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
loose fit
1
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
great print!! i would use a rim to keep the top edge from pulling p from the bed. turned out great!!
1
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
fit well! I tried TPU and was effective
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
prints well but caution when putting case on phone, it’s tight fit and will scratch the iPhone
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
Printed Perfectly, Stronger then expected.
But she thickk though. A little too thick.
0
Reply
Print Profile
0.16mm layer, 3 walls, 25% infill
printed it on carbon plate, that's fire
0
Reply
does it work with PLA?
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld