Bigger case/organizer for Bambu Lab swatches by lukasglowinski

lukasglowinski

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

15.2 h

8 plates

5.0(20)

Boost

107

186

Released

Description

This is the bigger version of my Case/Organizer for BambuLab swatches. Now it allowes to hold up to 10 boards with color swatches. There are two versions one with logo and one without. Just print the plates you want. Add your custom text to the tabs in the Bambu Studio slicer.

Use 8 pcs M3x16mm socket cap screws to put the case together.

Happy printing!

Comment & Rating (34)

@rutherfordk

Print Profile

0.2mm layer, 2 walls, 15% infill

worked perfectly, very happy with this model

@BossTechPrintIn

Great photos and great job with the print. I was wondering what you used to make the label name tags for each color filament?

(Edited)

@rutherfordk

Replying to @BossTechPrintIn :

these are the Bambu filament swatches I bought directly from Bambu. my wife is working on an option with her Cricut machine to duplicate the look for other filament swatches I print myself. I’ll update if we figure it out

@Fere.nl

Replying to @rutherfordk :

@KevoTheFord Let me know how that works out since my wife has a Cricut too, sounds like a nice solution to get other filament swatches in the same manner.

@Dripster

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Habe mir erst die Einschieber der kleineren Version gedruckt. Nach Absprache mit dem Designer wurde mir dann mitgeteilt das diese auch in die größere Version passen. Habe dann also die Box der größeren Version gedruckt. Die Einschieber passen dort wunderbar. Zusammenbau war kein Problem, die Löcher stimmten alle überein. Die zu verwendeten Schrauben kamen mir aber etwas lang vor 😅

The designer has replied

@lukasglowinski

Vielen Dank für die Bewertung, es sieht toll aus.

@Dripster

Boosted

Replying to @lukasglowinski :

Vielen Dank. Ich finde die Farbkombi mit dem Bambu Grün immer ganz toll und passend bei Beschriftungen ! :D

@lukasglowinski

Replying to @Dripster :

Ja, für viele Projekte ist es das, Happy printing :)

@raphratz

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect holder for all my swatches.

@c.brechmann

Perfect fit, THX!!

@Frelidon

Hat super geklappt Danke.

@DBComponents

Print Profile

0.2mm layer, 2 walls, 15% infill

Great model

@Dripster

Boosted

Do the boards of the smaller version fit in the bigger box ? So i can just print the boards from the left side and the bigger box ?

The designer has replied

@lukasglowinski

Yes the right side boards are exactly the same.

@Dripster

Boosted

Replying to @lukasglowinski :

Thanks, then i will print the left side as well and the bigger box :)

@winj

love the design. I noticed for the boards with tabs on the left that the peg is in the top right corner instead of the top left. Am I doing something wrong? Thanks!

The designer has replied

@lukasglowinski

I've changed now. It should be fine. Thanks for letting me know

@Soul_3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Great model. There was a little separation around one or two of the holes on the plate side of the prints, but it was minimal and still came out good. Be careful with the pegs as some of them came out a little larger than the others and the filament swatches would crack slightly when snapped into place.

(Edited)