Skadis - Deburring Tool Holder
Copyright Claim
Skadis - Deburring Tool Holder
Boost
46
107
28
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
43 min
1 plate
6 pack - tclips
Designer
21 min
1 plate
just the holder, no clips
Designer
39 min
1 plate
Boost
46
107
28
1
210
110
Released
Description
deburing tool holder.stl
- secured to the pegboard with 2 x Tclips
- Fits a standard plastic deburring tool like the one pictured
- Tried to make it use space efficiently, but this design requires the are above the top of the tool to be clear from obstructions, so do keep that in mind
tclip_adjusted.stl
- slightly tighter fit than the original “T-Clip for Unpainted Skadis.stl” by Will
- original tclips should work too but i have not tested with it
- these clips fit very tightly, negating all wobbles but might be affected by printer tolerances
Comment & Rating (28)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
la impresión ha sido perfecto incluso con un pla genérico
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
ok
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great and easy print. Works perfectly! Thanks!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Prints well, fitting is a bit tight
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice Print, it hold smaller parts good too.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
6 pack - tclips
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
the shape of mine doesn’t fit but it is useful though… thanks!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
ok fits 3d printed Deburring tool perfectly
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works great
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld