The perfect 8-bit addition to your Christmas Tree!
Also proof of concept for multi hue printing! This ornament appears to have been printed with 7 colors --
Black, White, Light Gray, Dark Gray, Red, and Brown. But it only used 4 colors (Black, White, Red, Brown)
----------------
If you like my stuff, check out my patreon
https://www.patreon.com/LilacRage
----------------
Print face down on the build plate.
Print at 0.2mm layer height
DO NOT CHANGE THE LAYER HEIGHT
--If you Change the Layer Height The Color Blending May Fail--
Colors used in the print:
-----
Be careful using other print profiles than the one provided. I had to slow down the first layer and tweak a few things in order to get the first layer to adhere well. The individual ‘pixels’ are quite small and unless your filament is dry and well tuned, you may have issues with the first layer. I also HIGHLY recommend using a textured PEI plate for the best surface finish and better adhesion.
___________
Check Out The Rest of my Ornaments Here
___________
Post Your Makes in the Comments!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.