A Bone Shaped Dog Bowl Holder!

My little pomerian Ahri likes to spend time in my home office while I work. So I created a dog bowl holder so I can have water for her in my office.

The attached files is for a blank holder (no writing on it) as you can see from the plate pictures as well. The other pictures are the one I printed and customized for my pup.

CUSTOMIZE YOUR DOG BOWL HOLDER!!!

Below are the steps if you want to customize the dog bowl holder with your own text. This is done in Bambu Studio and you must slice the model at .2 if your using my values below.

Bambu Studio - “Text Shape” Tool

1. Rotate the Model so its face up (makes adding text easier)
2. Click on the Model and then click on the “Text Shape Tool”
3. Set Size = 10, Thickness = .4, Embedded Depth = .4 and enter in the Text in the “Input Text” field and drag text where you want it
4. With the Text still highlighted click on the “Move” toolbar option and move the text down by .4mm in the Z direction (should equal 33.17). This will embed smoothly the text to top. We do this so when we flip this holder over to print the top surface will be smooth. Don't be alarmed when the text seems to disappear. It's still there and you'll see it when you slice the model.
5. Change the color of the writing by switching to object view and right clicking on the “Text_Shape" entry and selecting the filament color
6. Rotate the Image so the top is now the bottom (back to original orientation) and Slice. You will see your custom text embedded into the holder now if you view from the bottom up. Enjoy