Print Profile(12)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 30% infill

45 min

1 plate

4.9(190)

0.2mm layer, 3 walls, 30% infill 90%

35 min

1 plate

4.7(71)

Big and Small Extra Strong 0.2mm layer, 6 walls, 65% infill

2.2 h

1 plate

4.9(26)

0.2mm layer, 6 walls, 65% infill

1.9 h

1 plate

4.5(16)

Click to see more

Boost

719

1310

336

2.2 k

2.6 k

Released

Description

Summary

So glad to share the design to you
NEW Strong Flex door Carabiner

Check out new ORIGAMI Carabiner ! (thing:1819242)

It's a long process to make the previous design as perfect as it should be, and now the core design feature was mature enough to face on the new usability challenge.

The new design come with only 2 parts, hook and door, very easy to assembly and easy to make different scale for your need.

Scaled capacity of 75% to 120%

Door Flexible Strength = 3 (check out the selflex introduce on http://www.ddf3d.com/)

Check out the assembly film here:
https://www.youtube.com/watch?v=7wZM2DuAc4U

Check out the printable operation film here:
https://www.youtube.com/watch?v=tjnVmANtvWk

Check out more cool design on
http://www.ddf3d.com/

Design for general FDM 3D printer print by PLA or ABS material.
No additional support need, easy to print.
Fast print design make general print time around 45-100 min.

When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load.
The design can print without support and raft set.
Layer high from 0.15mm~0.3mm is fine.
Infill better to use over 50%.

Hope you will like it ;)

Print Settings

Rafts:

Doesn't Matter

                                            Supports:                      
No

Resolution:

0.15mm

                                            Infill:                      
50%

Notes:

ABS is better than PLA on tensile load and flexible spring strength.

When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load.

The design can print without support and raft set.

Layer high from 0.15mm~0.3mm is fine.

Infill better to use over 50%.

Hope you will like it ;)

How I Designed This

Check out more cool design on
http://www.ddf3d.com/

Special Reward to Supporter

TIP us $5 and reward the "Classic Lock Carabiner" 3d printable file.
We welcome your support by simple Tip to us, and we'll reward the "Classic Lock Carabiner" 3d printable file to you.
If you are going to Tip us and get reward, please follow the step.
1) Tip us on Thingiverse $5 or more.
2) Send us a message on "ddf3d.com" contact, tell us your mail and thingiverse ID.
3) Receive the mail attachment the reward 3d file.
Please Note: Please understand, we will send the file manualy ASAP, if you don't receive the mail in 12hrs, please contact us again. Thank you

Comment & Rating (336)

@photorob

Print Profile

0.2mm layer, 3 walls, 30% infill

cool print!

@FireDragon3D

Print Profile

0.2mm layer, 3 walls, 30% infill

prints out nice and easy. seems fairly strong. great design!

@bymafilip

Print Profile

AMS COLOR - 75mm Size

it is good. It survived longer than expected. the locking thing needed to be painted 2 times even though I used bambulab basic plan.

@adrian_ApeX

Print Profile

0.2mm layer, 3 walls, 30% infill

turned out perfect, printed with no issues and the movement is very smooth.

@MacsP1S

Print Profile

0.2mm layer, 3 walls, 30% infill

This is a very well engineered carabiner. not sure how much weight it can hold, which I’ll have to test, but it seems very strong.

(Edited)

@MrDavid

Print Profile

0.2mm layer, 3 walls, 30% infill

Works great! Thank you.

@Stockton07

Boosted

Print Profile

0.2mm layer, 3 walls, 30% infill 90%

I’m amazed at how strong this thing actually is. I’ve been using it to hold my water bottle on my backpack, and surprised it hasn’t snapped on the first go. Great model, great profile!