The Scream

Untill now i did add 2-3 color pictures but decided to go further and do something more challenging. So here we are, 2 ams version picture for 6 colors (with print plate for 1 AMS too, don't worry).

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.

The Scream is a composition created by Norwegian artist Edvard Munch in 1893. The Norwegian name of the piece is Skrik (Scream), and the German title under which it was first exhibited is Der Schrei der Natur (The Scream of Nature). The agonized face in the painting has become one of the most iconic images of art, seen as symbolizing the anxiety of the human condition. Munch's work, including The Scream, had a formative influence on the Expressionist movement. According to Wikipedia.

This version is slightly different from original to better fit color, hope you enjoy

For 1 AMS i added a pause (at 14 layer) just before the end of the 4th color which is orange to allow for slots 1 and 2 to be changed from Black and Green to Yellow and White- in this exact order!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA Sunlu Green Transmission Distance: 6
PLA Protopasta Cobalt Blue Transmission Distance: 5
PLA PolyLite Pro Orange Transmission Distance: 7.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA Default White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to Green
At layer #6 (0.56mm) swap to Cobalt Blue
At layer #10 (0.88mm) swap to Orange
At layer #15 (1.28mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to White for the rest.