(The very next day, you gave it away!)

Well, this heart will be totally fine being given away as a Christmas gift or to be hung up on your wall using The Crafty Maker's Wall Mountable Frame!

This print is 150mm x 150mm, and uses 4 colours so it's perfect for single AMS users on a Bambu printer. For those not using a Bambu printer, you can download the STL file and code in pauses in place of the filament swaps and just manually load and unload your filament spools!

The included 3MF will already have all the necessary settings applied to the print if you are using a Bambu printer. Otherwise, download the STL and follow the instructions below:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA META Sunlu Red Transmission Distance: 4
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At 0.88mm swap to Red
• At 1.28mm swap to Teal
• At 1.88mm swap to Jade White for the rest.

________________________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

________________________________________________