Jaws hueforge picture poster from the original movie with it's frame by Terminatordeux

Terminatordeux

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

0.08mm layer, 1 walls, 100% infill

Designer

17 h

2 plates

4.5(4)

Boost

Released

Description

An hueforge remake of the horror movie JAWS from it's original official poster.

Add an home made great white shark in 3d.

for the picture with shark, follow those steps

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu White Transmission Distance: 6
PLA Creality Black Transmission Distance: 6
PLA Sunlu red Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 6
PLA Sunlu Light blue Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 6
PLA Sunlu Light blue Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 6

PLA+ Esun light grey

Swap Instructions:
Start with White
At layer #2 (0.24mm) swap to Black
At layer #6 (0.56mm) swap to red
At layer #9 (0.8mm) swap to White
At layer #11 (0.96mm) swap to Light blue
At layer #15 (1.28mm) swap to White
At layer #17 (1.44mm) swap to Light blue
At layer #18 (1.52mm) swap to White for the rest.

At layer #22 swap to GREY for the rest.

The frame is all in black

Comment & Rating (6)

@user_3196526989

Print Profile

0.08mm layer, 1 walls, 100% infill

Turned out well. Only things I wish I'd changed is the sharks mouth to red and changed the protruding part of the shark to not be 100% solid. Could have saved filament and time.

@waynejohns1973

Disappointed that the area in the shatks mouth was just left as the original poster, so doesn't make any sense at all. Not a major problem just meant it needed painting, as well as the area around the shark to get rid of the blue and white. Overall looks great with a 0.4mm nozzle