An ultra slim monitor led light bar. It uses 3mm cob ledstrips and a touch sensor to control the brightness.
Additional parts used:
Note; no affiliate links here, just what I bought.
How to print:
Please check the photos for the one with the buildplate. You can see only “lightbar-part1.stl” needs a bit of support. The rest is designed to be printed support-free.
I also did not need a brim, but you could put it on for safety since the parts are pretty narrow and the ends of the lightbar-parts could potentially lift from the bed.
Rest of the print-settings in 1.75 PLA with 0.4 nozzle:
layer height | 0.2mm |
walls | 2 |
top shell layers | 2 |
bottom shell layers | 2 |
infill | 15% grid |