Dyson V10 / V11 cross-bolt trigger lock by Rilot Designs

Rilot Designs

Tools>Other Tools

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

51 min

1 plate

4.3(15)

Boost

109

Released

Description

I - like many people - was annoyed by the lack of a trigger lock on the V11 series. I tried many solutions to this; some community and others commercial but all of them came up short. They either were a piece that I would lose, or they restricted the operation of the trigger when attached. There had to be a better way…..

So, sat on my sofa one evening I was thinking about the V11 (as you do) and triggers when a thought entered my head: “What else has a trigger? Firearms have triggers. Some firearms have cross-bolt safeties or cross-trigger safeties that lock the trigger out. What if a cross-trigger safety could work in reverse?”

So, I took a scan of the V11 and got CAD'ing. This was the result: A cross-trigger safety that doesn't restrict the operation of the trigger.

To complete you will need:

2 x M3x10mm Allen head bolt
1 x M2x40mm Allen head bolt
1 x M2 nut

Tolerances should be OK as is. I printed the parts in PLA on a Bambu X1C but any accurate printer (Prusa etc.) will be fine.

dyson

Comment & Rating (22)

@cleeb1983

Print Profile

0.2mm layer, 2 walls, 15% infill

Great design! I printed it with Prusament PETG @ 0,12mm layer height and it fits perfectly on my V15. fyi: I changed the orientation of the pin and printed it horizontally and as luap71 already mentioned, you don’t need a M2x40mm. I used a M2x20mm and the bolt is long enough.

@nivax

Print Profile

0.2mm layer, 2 walls, 15% infill

The design is great, however, it keeps the button stuck. I’ll need to make some adjustments for it to work with the V10.

@svnjcby

Print Profile

0.2mm layer, 2 walls, 15% infill

Passt fast perfekt, etwas Nacharbeitung notwendig (ein bisschen zu eng). gedruckt in Bmabu ABS Lila

@luap71

Fits great on my v15 - you don't need a M2-40mm - not sure why that is in the description (typo?) that bolt and nut are both inset - I used a M2-19mm (its what I had) and it had plenty of thread through the nut - probably could have used a M2-16mm. Anyway - great design!

(Edited)

@MikeBacin

Print Profile

0.2mm layer, 2 walls, 15% infill

Had to print the pin with PETG, great model!

@wolfpower

Print Profile

0.2mm layer, 2 walls, 15% infill

Interesting construction, but I needed to enlarge one side with about 1 mm for perfect fitting. Also the cilps break very easily. I put some glue on it and it works fine now.

(Edited)