2/14/2024 - Updated the files to improve mounting versatility per feedback received. Two versions are available. V1.1 will have a fixed screw mount on end and an adjustable mount on the other. The V1.2 version not only allows for the most versatile mounting but also accepts three prong plugs. For both versions the plug slots were increased slightly to improve an easier initial insertion but may still require a few plugging and unplugging's to loosen the holes up. if a plug feels tight do not just ram it in work it in and out a few times and should just slide right in with little effort. Additionally, increased the M4 recessed holes so M4 washers can used.
Original post:
Photo shows my test model with one screw. Models available for download has holes for two M4 screws. I just used an M4x16 screw and M4 hex wall adapter to mount to my hex wall. Can also just be wall mounted with standard drywall screw.
Can print face down if you have a fancy pattern plate without support though for V1.2 you may want some support to bridge the gap.
Once printed you may need to take a charger adapter and just work it gently into each hole the first time.
Any suggestions or mods are welcome! Happy Printing!
If so inclined to fuel my productive addictions all contributions are greatly appreciated here.