Z axis Linear Rods Bearing Anti Dust Protector by Chester3D

Chester3D

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

8 min

1 plate

4.5(39)

PETG 0.16mm layer, 2 walls, 15% infill

9 min

1 plate

5.0(2)

Boost

104

356

176

Released

Description

Z-axis Linear Rods Bearing Anti Dust Protector / Cap.

Tight fit to prevent vibrations.
Simple but effective mod, totally recommended to prevent dust particles and dirt in general from falling between the bearing and the rod. Protects the bearing balls as well as the lubricating grease for much longer.

Comment & Rating (41)

@TheProphet

Print Profile

0.2mm layer, 2 walls, 15% infill

Does not fit tightly enough to confidently stay in place, also allows the part to vibrate due to it's relatively loose fit. Aesthetically very pleasing regardless of loose fit, and mostly likely could be printer at 1.01~ scale to resolve fitment issues.

@user_2626076842

Print Profile

0.2mm layer, 2 walls, 15% infill

loving the design 👌

@nbernhar

Print Profile

0.2mm layer, 2 walls, 15% infill

No problems. Easy and quick print - thank you :)

@Warlock

Print Profile

0.2mm layer, 2 walls, 15% infill

At 100% they were too large and didn't fit the hole properly on my X1C. At 99% they were slightly too small and had a little play when sat in place. I ran a calibration with the smaller ones in place and they stayed put. Should they ever pop out. I'll figure out the exact size I need and reprint them.

@Montel

Print Profile

0.2mm layer, 2 walls, 15% infill

很好用的小东西。

@infamous61

Print Profile

0.2mm layer, 2 walls, 15% infill

Did not fit

@danielguddas

Print Profile

0.2mm layer, 2 walls, 15% infill

the print came out well.

@rpinerd

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great and snapped right into my left axis, however it doesn't seat at all on my right one, this is the third one of these I've tried with the same asymmetry so there is clearly something up with my printer lol