Exhaust for Anycubic Photon Mono X 6K

Even with AirPurifiers inside the printer when using smelly resins, it still smells while the printer is running. This exhaust directs outtage from the printer directly into the AirPure purifiers from Anycubic so the smell from the resin is minimized even from the printer.

Assembly

• Unscrew the 6 screws from the back of the printer but DO NOT take the back plate off.
• Place the exhaust on the backplate and screw back those 6 screws.
• Finally place your AirPure purifiers inside the exhaust cutouts.

Remixes

Feel free to remix or edit the exhaust to your liking.

Fusion360, STEP and STL are provided.