To compliment the Little Pocket Hug Fidget Toy I made in an earlier upload, I thought it would be nice to make the same but using Braille dots, unfortunately I don't know of any persons who can read Braille so this hug is untested, after some research I found out that the Braille dot height is 0.48mm but not sure if the spacing is correct etc, would be nice to get some feedback on this if any one out there has friends who can read.

The Hug revolves on the lower axis giving satisfying clicks as it's revolved and uses 5 x 2 mm Neodymium magnets to achieve this, the holes for the magnets in the axis are deeper and can take multiple magnets to create the axis whereas the upper holes only accept one magnet.