StarWars deathstar lithophane lamp by Olivier3dPrint

Olivier3dPrint

Household>Decor

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 100% infill

Designer

23.1 h

1 plate

4.6(38)

Faster print, 0.28mm layer, 2 walls, 15% infill

16.5 h

1 plate

4.9(20)

Boost

590

947

1.3 k

339

Released

Description

A deatshstar lamp from the starwars saga

Stand can be found here : https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files

You can buy me a Tea (i do not like coffee ;) ) here https://ko-fi.com/olivier3dprint

If you want using the BambuLab Led Kit 001, i made on for this

star wars

lamp

Comment & Rating (90)

@BillyBob

turned out great!

@Boanderswood1

what light socket fits the bottom connection?

@BillyBob

I just found a cheap one on Amazon and just mod it to fit the one I bought. REXTiN 2 pcs E26/E27 LED Light Socket 5.9FT Extension Cord with On/Off Switch and US AC Power Plug Bulb Socket for Pendant Lighting Bulb Lamp in Kitchen Bedroom Restaurant (2 Packs) https://a.co/d/0iVbOPh

@BillyBob

Replying to @Boanderswood1 :

https://makerworld.com/en/models/412412 I uploaded the model if that is helpful.

@BushySushiPanda

Excellent model and looks great when lighted.

The designer has replied

@Olivier3dPrint

Thanks

@bhfield

Looks awesome! What filament and color did you use?

@BushySushiPanda

Replying to @bhfield :

This was Overture PLA white.

@straight606

Print Profile

Faster print, 0.28mm layer, 2 walls, 15% infill

I cut this in half and am using it as a light diffuser for our living room! turned out awesome!

@.s_.

this is awesome. can you share the print profile

@straight606

Replying to @.s_. :

I used the print profile from the original uploader. all I did was measure my light diameter, cut the model in half then scaled it to the size I needed for my light. I didn’t change any settings. then I used some double sided 3m tape to secure it to my light!

@MikeBacin

Print Profile

0.2mm layer, 2 walls, 100% infill

Amazing results, printed with Polymaker PLA Steel Grey (Hex Code: #616469)

@2Goodwins

I think this is the coolest one I've seen.

@Boanderswood1

great print. one question. is the base a connector for a certain light type or the stand? for some reason I can’t get to the stand from your links.

The designer has replied

@Olivier3dPrint

the base connector is the same that "Designer lithophane moon lamp" can be found on Printables

@popoboxxo

Print Profile

Faster print, 0.28mm layer, 2 walls, 15% infill

Printed with SUNLU PLA Grey, almost smoothly with the exception of one layer at the bottom. Due to the faster printing, it appears to have a slightly glossier look than the profile with 100% infill. But this could also be due to the filament. Only 16 hours instead of 26. possibly even slightly more translucent. Loss of quality due to the larger layers is visible, but insignificant.

@onlysky

muy chula!!!... Impresión sin problemas. muy has gracias!!

@PeterHall

Print Profile

0.2mm layer, 2 walls, 100% infill

Very happy with this! printed in Bambu Lab Matte Ivory White. Next - a stand for it! :)

@joeturczak

Print Profile

0.2mm layer, 2 walls, 100% infill

Came out really nice. For a normal lamp like the IKEA one that hangs from the curling you need to use the 28mm adapter. You will also need to use tubular bulbs, as a regular one will not fit in the hole. Overal,l nice model. I wish it had an indentation where the weapon is but that's ok still looks great.