Mountain Designs

Unicorn Whirlygig - Copy_0e419b72-2191-415d-9496-2a21ab91bc3d.pdf

cover

P4250015 - Copy_4868d5cf-5272-4326-bf64-ede35f3e12f6.jpg

P4250040 - Copy_d6d23cff-c3fc-45d4-8055-e217bc08d792.jpg

P4260173 - Copy_f3bd9201-02c3-429f-a28d-d99a798e1d20.jpg

P4260189 - Copy_14a1502d-e2aa-4a35-8af0-0e7ab3e3da7f.jpg

P4250007 - Copy_97a49a00-d0a4-482c-b12b-1c13f4443533.webp

plate_1.webp

plate_1.png

0.2mm Layer Height, 2 walls, 20% Honeycomb Infill, Note the modifiers for the wings have 2 top layers & the little unicorns for hanging on the string have 2 layers top & bottom.You can find the modifiers settings under the Objects tab in Bambu Slicer if you need to make changes.

0.2mm layer, 2 walls, 20% Honeycomb infill + Modifers

P1010062 - Copy_0edc4e31-445d-4373-b98a-078413f10506.webp

0.2mm Layer Height, 2 Walls, 20% Honeycomb Infill.The wing modifiers have 2 top layers with the small printable unicorns for hanging have 2 top & bottom Layers.Changes, adjustments can be made under the object tab in Bambu Slicer

0.2mm layer, 2 walls, 20% Honeycomb infill

P1020071 - Copy_e22359c9-adce-4628-83fd-be0418f11645.webp

0.2mm Layer Height, 15% Infill + Modifiers.The Leaves have Modifiers which make the holes, these are set to no infill, no top or bottom layers & no walls.

0.2mm layer, 2 walls, 15% infill + Modifiers

Unicorn Whirlygig.I have added the modifiers to the print profiles to make them easier to print, requires only few parts & is excellent addition to any garden or verandah.Mine have been printed out of PLA & have been outside for overs 12mths wher the Max temp has been around 40 Degrees C.You will need 2 x 683zz bearings, some 2mm wire to complete the dragonfly with specifics & option as set out in the instructions.

Magical Mini Unicorn Whirlygig

Global

Print Profile(3)

Description

Documentation (1)

Comment & Rating (0)

License

Related Models

Amazing Mermaid

unicorn lamp

Unicorn

Lucky unicorn