This is my Design for 2 very useful Clips for the BoboVR M2 & M3 Headstrap.
The upper Clip is for a better Guide and storage if not in use for the BoboVR Cable.
The second Clip is for both, the BoboVR Cable and the Link Cable if in use.
I strongly recommend printing in TPU Shore 95A or an simmilar Material
The first (upper) Clip dont need to be cutted.
You only have to remove the small Pad an then pull over like you see in the picture (arrow)
The second clip needs to be cutted after printing in the way you see on this picture.
Watch your fingers!
After cutting the Clip you can Pull the Clip over like you can see in the second picture.
Even though it is cut it has a strong hold!
happy printing