ES
Cambios en amarillo
***30/12/2023 Actualización
Añadido perfil de soporte Largo (+2cm)
**** 26/12/2023 Actualización
Añadido logotipo
****25/12/2023 ACTUALIZACIÓN
Ajustado el cabezal para que sea mas estable en la conexión con la impresora. He intentado ajustar también la conexión con la cámara para que este mas pegada a la maquina, pero eso hacia que la cámara no se pudiera levantar bien para abrir la puerta.
Edición de tapa de botón P1S con adaptador de cámara TP-Link TAPO c110 (2k).
impreso a velocidad estándar de 0,2mm en p1s, no necesita soportes.
6,98g filamento (2,3m) y 14,11" de tiempo de impresión, 19'57" tiempo total Tiempo de planificación (calibración de cama)
Camera Link https://www.amazon.es/TP-Link-TAPO-C110-bidireccional-notificaciones/dp/B094DM9LZQ
Posiblemente compatible con tp-link TAPO-C100 (1080p).
Imprimo con la puerta de la impresora ligeramente abierta ya que tengo el AMS encima de la impresora. la luz lateral molesta un poco la visión de la cámara, pero se ven perfectamente los objetos tanto con la placa hacia arriba como hacia abajo.
****06/12/2023 ACTUALIZACIÓN
He recortado un poco la punta del adaptador, por si tiene un addon para levantar el cristal, para que no roce.
Se ha ampliado la zona donde se conecta la cámara, para que quede más abajo, y en las esquinas de la vista de la cámara no aparezca el chasis de la impresora y sea todo zona de impresión.
También he reducido la sujeción del "enchufe" para que sea más estable y encaje mejor.
cualquier comentario o idea es bienvenida.
EN
Changes in yellow
***30/12/2023 Update
Added support profile Long (+2cm)
**** 26/12/2023 Update
Logo Added
****25/12/2023
Adjusted the head to make it more stable in the connection with the printer. I have also tried to adjust the connection with the camera so that it is closer to the machine, but that made the camera could not be lifted well to open the door.
P1S button cap edition with TP-Link TAPO c110 (2k) camera adapter.
Printed at standard 0.2mm speed on p1s, no brackets needed.
6.98g filament (2.3m) and 14.11" print time, 19'57" total time Planning time (bed calibration).
Camera Link https://www.amazon.es/TP-Link-TAPO-C110-bidireccional-notificaciones/dp/B094DM9LZQ
Possibly compatible with tp-link TAPO-C100 (1080p).
I print with the printer door slightly open as I have the AMS on top of the printer. the side light disturbs the camera view a bit, but you can see the objects perfectly both with the plate up and down.
****06/12/2023 UPDATE
I've trimmed the tip of the adapter a bit, in case you have an addon to lift the glass, so it doesn't rub.
I have enlarged the area where the camera connects, so that it is lower, and in the corners of the camera view the printer chassis does not appear and it is all printing area.
I have also reduced the "socket" attachment so that it is more stable and fits better.
any comments or ideas are welcome.