X1C - P1 Top Glass Riser
Copyright Claim
X1C - P1 Top Glass Riser
Boost
20
52
45
Print Profile(4)
Corner Glass Riser (two colors)
Designer
1.4 h
1 plate
Corner Glass Riser (single color)
Designer
1.2 h
1 plate
Optional middle glass riser (single color)
Designer
21 min
1 plate
Print on A1 mini - 0.24mm layer, 3 walls, 15% infill
2 h
1 plate
Boost
20
52
45
5
113
128
Released
Description
After using my perimeter version of the X1C top glass riser for several months (you can find it by clicking here), I designed this variant consisting only of the four corners which therefore does not require any connectors for assembly and has a very short printing time.
You will find two printi profiles for this riser: the main one is to make it in two colors (as in the photo), the other is to print the corners in one color.
Comment & Rating (45)
All
Print Profile
Corner Glass Riser (single color)
Perfect fit and the extra space is ideal. Thank for sharing.
The designer has replied
1
Reply
Thank you - I see you have a lot of extra space above the printer, well done!
...and I see you printed it in PLA Galaxy, right? I have yet to try it but I already like it!
(Edited)0
Reply
Replying to @Officina23
Usa
0
Reply
Replying to @Officina23
Flashforge petg in burnt titanium
(Edited)1
Reply
Boosted
Print Profile
Corner Glass Riser (two colors)
the fastest riser to print... for now I'll leave it like this but in future I'll have to print a more complete riser to add the LEDs. good job. the lightest and fastest to print
The designer has replied
1
Reply
Thank you, being able to print it in a short time was the primary objective of this riser. (...magari potevo risponderti in italiano?)
0
Reply
Boosted
😂 piu che la velocità non avevo nemmeno abbastanza filamento per stampare il riser completo.
ma ti dirò forse lo lascio cosi... vediamo se riesco a mettere una buona illuminazione sopra il vetro ... l'unico dubbio che mi viene è se magari al centro dei 4 lati non ci starebbe un altro "zoccolo" per sorreggere il peso? ho paura per il vetro
0
Reply
Print Profile
Corner Glass Riser (single color)
flawless print
The designer has replied
1
Reply
Thanks
0
Reply
Print Profile
Corner Glass Riser (single color)
Prints well and works as designed.
The designer has replied
1
Reply
Nice print!
0
Reply
Print Profile
Corner Glass Riser (two colors)
Very nice !! thx
1
Reply
Boosted
Print Profile
Corner Glass Riser (single color)
Works great
1
Reply
Print Profile
Corner Glass Riser (single color)
1
Reply
Boosted
funziona bene... se un giorno vuoi fare un upgrade e mettere anche dei supporti centrali cosi da poter sorreggere piu peso penso che sia una bella idea...
The designer has replied
1
Reply
Lo farò di sicuro, grazie
0
Reply
@verdemarcomaker ho pubblicato un profilo con un singolo elemento centrale. La parte rettangolare incavata serve per non interferire con le viti della maniglia di sollevamento.
https://makerworld.com/en/models/119798#profileId-383251
0
Reply
Print Profile
Corner Glass Riser (single color)
just what I needed.
The designer has replied
1
Reply
Thank you
0
Reply
Print Profile
Corner Glass Riser (single color)
excellent solution to letting heat out of top of P1S
The designer has replied
1
Reply
Thanks
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld