A1 Series Purge Wiper Riser
Copyright Claim
A1 Series Purge Wiper Riser
Boost
228
479
175
GIF
GIF
Print Profile(2)
Standard Profile
Designer
8 min
1 plate
0.2mm layer, 3 walls, 15% infill
7 min
1 plate
Boost
228
479
175
2
851
604
Released
Description
Your mileage may vary!
Quick simple fix or improve the purge wiper blade on the A1 series printer by adding a spacer to rise the wiper closer to the nozzle, approximate about 1.25mm.
Please check to make sure the wiper has clearance with the nozzle toolhead after the installation!
Installation
Comment & Rating (175)
All
super..
with a combination cut ptf tube
5
Reply
不知道为什么我mini上的这个挡板和大家的不一样，不过这个垫片仍然是有效且好用的。
The designer has replied
0
Reply
Looks like the newer A1 series got a new revised wiper blade.
Google Translate: 看起來較新的 A1 系列有一個新修改的雨刷片。
0
Reply
Print Profile
Standard Profile
This is a very nice idea.
The hight is slightly too short, so the problem I see is that the screw is too short for it to match the small gap to the nozzle.
So the wiper does not clean the nozzle every single time.
1
Reply
Print Profile
Standard Profile
va perfecto quita los hilos que quedaban colgados
1
Reply
Print Profile
Standard Profile
works perfect
1
Reply
Print Profile
Standard Profile
good fast print. I recommend printing it with a 0.2 nozzle.
1
Reply
worked great for me!
1
Reply
Print Profile
Standard Profile
It fits well. Now there is a smaller gap
0
Reply
Print Profile
Standard Profile
ok good
0
Reply
Print Profile
Standard Profile
nice
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (3)
Click to see more
Related Models
© 2024 MakerWorld