This is the evolution of my clip to snap on the edge of the Sunlu spool. It remains firmly on the edge and without your intervention this clip will never come off and it can be used with both new and almost finished spools. This clip is compatible with the use in AMS lite, but before mounting the spool on the closed AMS it is necessary to remove the clip.

The print profile provides variable layer height, in order to maintain the correct dimensions without compromising aesthetics. With these small clips I always recommend setting at least 2/3 mm of brim around the model, or printing it on textured PEI plate.

However, if you want a clip that doesn't need to be detached when using the AMS, consider downloading my “Sunlu Spool filament Clip internal”

Please note: before downloading and printing SPAM profiles, check that it was actually printed by the author and that the photo used is not just a screenshot, that it is not a copy of the original profile picture or that it is not the photo stolen from those published by another user! Also check that the profile does not compromise resistance, quality and printability.