Original art created by us, then we used Hueforge to create this 200x200 piece.
Please share your prints
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Green
PLA PolyLite Luminous Green
PLA BambuLab Basic Jade White
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Green
At layer #7 (0.64mm) swap to Luminous Green
At layer #13 (1.12mm) swap to Jade White for the rest.