Man's Best Friend
This is an artwork made using HueForge, using multiple lines to outline man's best friend - the dog.
Suitable for this 150x150mm frame. https://makerworld.com/en/models/57319

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Orange
At layer #18 (1.52mm) swap to Jade White for the rest.