This frog not only holds the tea bag when brewing, but also holds the used tea bag in his bucket/basket which allows it to dry out before dropping into trash bin and therefore reduce trash water content that promotes bacteria growth.

Easily print with PETG without support. Can be printed in single color or multi-color. Colors are set by height range and thus has limited number of filament swaps. Two print profiles for multi-color printing are provided, one for 4 colors and the other for 3 colors. See profile photos for detail.

No assembly is needed.

It’s simple to use. See the GIF animation (video can be grainy due to high compression to reduce file size). But here’s the instruction: Pull the tea bag string over the notch at end of the fishing rod, down and slightly towards you, then pull the string through the cut notch on the reel. If one finds it not easy to do that then try this: touching the paper tag at the upper part of frog’s belly as shown in the GIF, as doing that mostly will get the string inside the cut notch on the reel. Then let the bag pull the string back naturally and keep the paper tag slide along the frog’s hand, as shown in the GIF. When it gets to the point between frog’s fingers and the reel, push the paper tag up into the space between them.

Check out my other kitchen designs:

Yin Yang Tea Bag Organizer Tray

Snap-on Hands-Free Can Strainer

Rinser for Tall Glass/Bottle/Flask/Thermos