Honda Lightbox LED Lamp
Copyright Claim
Honda Lightbox LED Lamp
Boost
53
91
23
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
5.3 h
2 plates
Boost
53
91
23
1
130
142
Released
Description
Honda logo 3 colors
See also Honda HRC Lightbox
Tips
I recommend using a textured PEI sheet and the print profile I provided since it has settings with which I've been able to get the best results, if you do not want to use it these are the general bambu studio settings:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color
Comment & Rating (23)
All
turned out fantastic, what LEDs are you using?
The designer has replied
0
Reply
I'm happy to hear that everything turned out well! 🤩 Thanks for the amazing make and feedback! 🙏 Happy printing and if you have a moment of time you can check out my other BambuLab designs! 😃
https://it.aliexpress.com/item/1005006436319696.html
with Switch, White Light, 1m IP21
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
worked like a charm! I printed this in PETG. Thank you designer!
The designer has replied
0
Reply
I'm happy to hear that everything turned out well! 🤩 Thanks for the amazing make and feedback! 🙏 Happy printing and if you have a moment of time you can check out my other BambuLab designs! 😃
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Very good quality. I increased the lip of the backplate so it would stay on better and to have more freedom when installing lights.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Realy nice Lightbox! Both parts fit perfectly together! This is a present to my son who bought a new Honda motorcycle a cpouple of days ago. He was very pleased!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
amazing
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Boosted
I really love your design, i have printed without AMS but with hard work :))
The designer has replied
0
Reply
Thank you very much, it is a pleasure to share my works 😍
0
Reply
Boosted
Hi, Is there any way that i can print this without AMS?
The designer has replied
0
Reply
You can do it by changing the filament by hand, it will be very uncomfortable and take a long time but you might be able to get a good result
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice design!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld