Jet another Vallejo/Citadel-Paint holder, standalone version 4x4 by Slanjonok

Slanjonok

Tools>Other Tools

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.12mm layer, 2 walls, 15% infill

Designer

4.6 h

1 plate

4.9(20)

Boost

160

105

Released

Description

This is an improved version of my previous paint holder, having two advantages:

a) can be printed without any support
b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close to empty.

Hope you enjoy it same way, as I do.

There are remixes 4x3 and 4x5:
https://cults3d.com/en/3d-model/tool/vallejo-paint-holder-standalone-version-4x3-remix
https://cults3d.com/en/3d-model/tool/vallejo-army-painter-paint-rack-holder-standalone-4x5-remix

SOSWOW made a prametric version for Fusion avalible, so you may adjust to numbers of rows and columns you like to have (and are able to print on your printer):
https://cults3d.com/en/3d-model/gadget/17ml-bottle-holder-fusion-360-customisable-8x9-version-included

Update 2023-09-02:
On request I made a version for Citadel-paint bottles.

Comment & Rating (25)

@FancraftForge

Print Profile

0.12mm layer, 2 walls, 15% infill

Nice!

@Crusader32

Print Profile

0.12mm layer, 2 walls, 15% infill

Came out perfectly. I just had to change the size a bit because my bottles have a different diameter. Printed in PLA-CF Burguny Red

@DropPunk

This does not fit a citadel bottle.. where is that version?

The designer has replied

@DropPunk

I found it over on Cult. Thanks for that one!

@Slanjonok

Sorry, the print profile is made for the Vallejo/Armypainter-Version. The citadel-version can be downloaded here over the RAW Model Files-botton. At least until someone prints it and upload a print profile this is the only way. I have no use myself for this version and Makeworld asks for tested profiles.

@DropPunk

Replying to @Slanjonok :

I found it and printed it on my P1S. If you want a tested print profile, let me know. It came out great!

@klimispp

Print Profile

0.12mm layer, 2 walls, 15% infill

excellent print

@DropPunk

Print Profile

0.12mm layer, 2 walls, 15% infill

Works perfectly!

@myglasses1994

Print Profile

0.12mm layer, 2 walls, 15% infill

turned out great I printed 2 back to back and both came out the same. only thing I note is that due to no support some areas looks worse however as the print Is intended for function over looks its fine as it does not effect anything structural