P1S & P1P Tool Head Holder by KiCkiN

KiCkiN

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 15% infill

Designer

18 min

1 plate

4.8(27)

Boost

154

116

Released

Description

P1S & P1P Tool Head holder with embossed Bambu Lab logo.

Holds your tool head/hot end cover while changing nozzles, changing filament cutter blades, etc.

Can be printed with the Bambu logo a different color to “pop.” I lost dual color one I printed a few months ago but Ill add the pics as soon as I find it.

Printed at a 0.2 layer height and below. It may be possible to print with a larger layer height and still keep the bambu logo detail in tact but I havent tried it.

No supports. No brim required, at least not on the textured build plate.

Comment & Rating (31)

@jr1979

Print Profile

0.2mm layer, 4 walls, 15% infill

printed in tough PLA

@ANIMALMODS

" I lost dual color one I printed a few months ago" - really?

The designer has replied

@KiCkiN

I didn't understand what you were asking until I looked at your profile. I'm not sure if you designed your own or if you remixed mine before I took it off another site. (idk if we're allowed to mention other sites by name with the recent "drama") I allowed remixing when I had it up then so its fine if you did. That design was the same as this but it snapped to the bottom rod too. I ended up cutting that off and leaving a "tail." Cheers

(Edited)

@user_1762435228

Print Profile

0.2mm layer, 4 walls, 15% infill

Perfekt Tool! I think it helps me very often! Thank you!

@maxime22

Boosted

pratique

@Fantrion

Print Profile

0.2mm layer, 4 walls, 15% infill

works well most of the times. having it is certainly better than not having it

@maxime22

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

perfect

@PiTRiS

Print Profile

0.2mm layer, 4 walls, 15% infill

Prints well, but hold of the head is not that good...you have to be careful not to touch it. Easier to unplug and put on bed.

@Buko

Print Profile

0.2mm layer, 4 walls, 15% infill

very good!

@ddfogleman

Print Profile

0.2mm layer, 4 walls, 15% infill

very good quality

@braincrack

Print Profile

0.2mm layer, 4 walls, 15% infill

nice print, very usefull. P1S, 0.4 Nozzle.

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

USBuffer - 5 Volt USB Filament Buffer

Dingus Dude

142

108

Jerry's wall hole. Wall decor.

Libro

178

150

X1/P1 Series LED Support

nweishar

Armbrust

3DPrintCreator