This is a remix of the excellent Head Tracker case made by DarKHawK.
I reused the same mounting style but redesigned the case for the Nano 33 Sense version and added a balancer connector port instead of the cable to power the Nano 33.

The goggle adapter comes in 2 versions.

• DJI Mount_M3 Screws.STL
  -> this one will work with normal M3 countersunk screws which will self thread into the plastic

• DJI Mount_M3 Inserts.STL
  -> this one has larger holes and is thicker so M3 inserts (M5 outer, M3 inner thread) can be used for a longer-lasting connection especially if the tracker is removed often.

The pack also includes a receiver-style case that has a hole to the power cable and TX/RX can be routed through to connect it to Transmitters without integrated Bluetooth (e.g. the trainer port or the serial bus of the transmitter).

Arduino code and SW can be found here: https://github.com/dlktdr/HeadTracker

Resin Printer owners: A pre-supported version of the sense case is included with the name: SUP_Nano33_HT_Sense_Case.stl

TEVO

No

0.1618