Press insert - with Aluminum Profile 2020
Remixed by
Copyright Claim
Press insert - with Aluminum Profile 2020
Remixed by
Boost
21
37
2
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
5.5 h
3 plates
Boost
21
37
2
0
61
27
Released
Description
WHY?
I change the original model (Stealth Press (Heat Set Insert Press) by Iconic FAB - MakerWorld) of Iconic Fab because I wont use Rails.
I hope you enjoy and please, write your feedback tha I can improve this project
BOM
| Part | QTY |
| M3x8 | 5 |
| M5x25 | 3 |
| M4x8 | 3 |
| M4 TNuts | 3 |
| M3 Threaded Inserts | 7 |
| Bearing 625ZZ (Pulley Plastic With Bearing type of Ender 3) | 3 |
| Aluminum Profile 2020 - 250mm or Custom | 1 |
| Elastics simple of officer | 2 |
| Soldering iron (Generic, TS100/101 or Pine) | 1 |
| + printed parts |
SUPPORTED SOLDERING IRONS (The Original model - Iconic Fab)
Generic, TS100/101 and Pine.
PRINT GUIDELINES (The Original model - Iconic Fab)
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3D PRINTING PROCESS | Fused Deposition Modeling (FDM) |
| INFILL TYPE | Grid, Gyroid, Honeycomb, Triangle or Cubic |
| MATERIAL | ASA, ASA-CF, ABS, ABS+, ABS-CF |
| INFILL PERCENTAGE | > = 40% |
| LAYER HEIGHT | Recommended: 0.2mm |
| WALL COUNT | Recommended: 4 |
| SOLID TOP/BOTTOM LAYERS | Recommended: 5 |
| EXTRUSION WIDTH | Forced 0.4mm |
Comment & Rating (2)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
0
Reply
Thank you
0
Reply
No more
© 2024 MakerWorld