Use a layer height of 0.16 mm. Still fitting problems? → See "Troubleshooting" section below.
A purge deflector on which you can slide different baskets to save space - this is the mini pms (purge management system) - print it on one plate without support, 0.16mm layer height in about an hour.
Basket(s) locks into place when pushed in and you can reduce vibration sounds with the printable TPU mats, a piece of fabric or a piece of rubber (scroll down for more information).
If you are not printing this with a print profile: print without support, tolerances are designed for a layer height of 0.16mm and PLA, but other layer heights and filaments could also work.
You can use a printable TPU mat, a piece of rubber, folded paper or fabric to reduce vibration noise from the poop in the basket, I used some adhesive strips under the piece to attach it. When printing with specific sideways movements, a vibrating noise can occur when the poop lightly touches the side wall. This is least likely to happen with a rubber or TPU base, alternatively the wall can also be covered with the aforementioned pieces.
Have you used a layer height other than 0.16 mm? Then this may be the reason, but you may be able to find a solution below without reprinting
Looking for cool other things to print? Check out my Magic Bookshelf! https://makerworld.com/en/models/147616#profileId-161046
If you like my work, please feel free to support it with a small tip, I can never have enough filament and good coffee to help me with prototyping: https://www.buymeacoffee.com/dubios or https://ko-fi.com/dubios
Check out my other models!: https://makerworld.com/en/u/2166054501
Update 06.04.24
- added TPU inserts with walls
Update 28.02.24
- added a step file for remixing the baskets (remixing means major changes, not just adding a logo, have fun!)
Update 02.02.24
- The dubios lettering has been removed from the front and is now on the inside.
Update (01.02.24)
- New design to meet the new community guidelines.
- The chamfer at the bottom of the baskets has been removed to minimize rare print problems.
- BIG BOY basket has been removed - use L or XL basket.
- Minor fixes on the L (deeper standard) basket and XXL basket.
- The lightweight edition has been updated with the new purge deflector design (still thinner) and the basket has been updated (like the thinner standard basket, but for the lightweight rinse deflector).
- Added TPU mats for the Thinner standard basket and lightweight basket.
Update (28.01.24)
- The purge deflector connection to the printer is now a lot more stable tahn the old version to work well with the new baskets.
- Purge deflector design update (rounded corners) and little details.
- New baskets versions for the standard pms available, for a better overview, these have been published as remixes.
Update 27.01.2024:
- Vibration damping mats that you can print with TPU are now available for the standard basket and the BIGBOY basket (see instructions before printing).
- All purge deflectors for Standard mini pms sitting now more stable on the purge wiper than the old version.
- The BIG BOY basket is slightly smaller at the back, which has solved a problem when used on the A1 mini.
- The stronger basket lock for special Filaments - purge deflector for Standard mini pms is now suitable for most PLA-Matte filaments without grinding.
- Very strong basket lock version which you can than customize by grinding has also been added
- A version of the purge deflector for Standard mini pms with greater tolerance is now available (try other versions first before printing)
Update 26.01.2024:
- The baskets for the standard mini PMS (standard basket and BIG BOY basket) are now slightly larger on the right-hand side to catch more of the threads that sometimes fall off the right-hand side of the purge wiper.
- The bevel under the BambuLab lettering has been modified to make it easier for the printer to produce a beautiful result.
Update 18.01.2024:
New stronger basket lock version of the Standard deflector added if problems with the basket lock occur (like when using PLA-Matte)
Major Update 15.01.2024:
- The old mini-pms is now called Lightweight mini pms, the new one is called Standard mini pms or just mini pms
- All mini pms editions:
- Fixed adapter (the oval to stuck the mini pms on the printer), see hot fix update 15.01.2024
- The slider (holder) for the “baskets for mini pms” now click slightly in
- Chamfer bottom edge instead of rounded for an smoother print
- Standard mini pms (new ones):
- Significantly more stable than the lightweigt edition thanks to the thicker "purge reflector for standard mini pms".
- The standard basket is now slightly larger, making it much easier to throw the test strips in and less of the purge shooter goes astray
- Standard mini pms BIG BOY:
- Thanks to the new design, it is now possible to attach a much larger basket without any losses, the mini BIG BOY (maybe in future comes also a deeper one)
Hot fix update 15.01.2024:
- purge deflector oval has been adapted, it now fits better on the printer
- the slider (holder) for the “basket for mini pms” now clicks slightly in