Bambu 250g Spool Adapter
Boost
51
68
36
Print Profile(4)
0.16mm layer, 3 walls, 15% infill
Designer
2.2 h
1 plate
FAST 0.2mm layer, 3 walls, 5% infill
1.2 h
1 plate
A1-0.16mm layer, 3 walls, 15% infill
2.6 h
1 plate
由FAST 0.2mm layer, 3 walls, 5% infill改变而来 增加底部耗材挂钩长度适配中国耗材 其它不变
1.3 h
1 plate
Boost
51
68
36
0
150
145
Released
Description
Simple spool holder that adapter the stock bambu spool holder to accept smaller spools, like the 250g rolls from Sunlu
Comment & Rating (36)
All
Print Profile
FAST 0.2mm layer, 3 walls, 5% infill
Good
The designer has replied
0
Reply
Thanks for sharing your results 😍👏🏻👏🏻
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
very Nice
Andrew super Strong
job Isabelle perfect
0
Reply
Print Profile
FAST 0.2mm layer, 3 walls, 5% infill
Printed great. Thanks!
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
printed awesome. just gets in the way of the “poop chute”, but fixes a problem I had after I ordered a bunch of sample spools
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
the model can be optimized but the idea is super! really appreciate it 😉
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
simple print, very effective
0
Reply
Print Profile
FAST 0.2mm layer, 3 walls, 5% infill
0
Reply
Print Profile
FAST 0.2mm layer, 3 walls, 5% infill
Works well for small Sunlu.
0
Reply
Print Profile
FAST 0.2mm layer, 3 walls, 5% infill
worked exactly as intended and needed
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
worked great for my small filaments.
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld