Ryobi TS1352 Throat Plate
Ryobi TS1352 Throat Plate
Print Profile(0)
Description
Summary
As the throat plates for my Ryobi TS1352 Compound Miter Saw are discontinued, I created this design as a replacement.
This is a drop-in replacement, and can be printed in ABS or PLA. Just be aware that PLA may not stand up to tons of direct sunlight in the heat.
Update: I added a Zero Clearance version, which is basically the same with no slot cut. The downside is that you may want to print it with 100% (or nearly 100%) infill, as you'll be using your saw to cut the slot you need. I also recommend using ABS for the Zero Clearance version if you can, as it'll cause less wear on your blade than PLA.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Resolution:
125-250 microns
Infill:
30%
Notes:
This is best with a shell thickness of about 1.2mm or so, and a moderately high infill.
Comment & Rating (0)
License
