Untitled Goose Game Character - The Entitled Goose - Coloured Model - Large Print - Magnet Support Remixed by vidguide

Remixed by

vidguide

Toys & Games>Characters

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

AMS Colored, with Supports - 0.2mm layer, 15% infill

Designer

6.7 h

1 plate

4.8(14)

Boost

160

102

Released

Description

Entitled Goose/Untitled Goose from the Untitled Goose Game - Character.

This model is a remix from the Gynni on Thingiverse and has been colourised for use with the AMS.

3-Colour model with orange feet & beak, and black eyes. Tree-Supports on build-plate-only are recommended (and enabled in the default print profile).

The model has a spot to glue a magnet under the beak so it can hold metal objects, such as keys, or a knife, or anything else you can think of.

This is a fairly large model as-is, but can be easily scaled up or down as you desire. (note: if scaling the size, please be aware of possible changes to magnet compatability.

Comment & Rating (31)

@grzesiekz

Profile shows 4 colors (white, black, orange and grey) Could you remove grey to have less collor changes? Thanks

The designer has replied

@vidguide

hmmm, very odd. that wasn’t in there earlier, I must have included it by accident when I fixed the other colour issue. standby, let me fix.

@vidguide

There we go. Print profile updated, back to 3 colours now. Sorry about that.

@grzesiekz

Replying to @vidguide :

Thanks for that. Could you also look into one more thing? I cannot set Flushing volumes. Even when entered they go to zero after saving

@VagueDustin

Print Profile

AMS Colored, with Supports - 0.2mm layer, 15% infill

Fuck around and find out.

(Edited)

The designer has replied

@vidguide

blue goose!

(Edited)

@mark.lg76

Print Profile

AMS Colored, with Supports - 0.2mm layer, 15% infill

the print used a lot of filament but turned out great

@rauschgiftengel

Printed the original one and sticked / glued it together. Don't want to waste my precious filament or time for changes :D but without your remix I wouldn't found it.

@3DUDEK

Print Profile

AMS Colored, with Supports - 0.2mm layer, 15% infill

Roztomilá husa. Povedený model. Díky

@user_2832417594

Heya! So sorry to ask, but I just wanted your permission to see if I could sell some of these? Like school or something since people seem to really like the ones I printed. Thanks so much (amazing print btw), have a great rest of your day!

The designer has replied

@vidguide

personally I have no problem with that. this is a remix based on the original print-in-pieces model on thingiverse which prohibits commercial use, so I can’t change the license here, it has to follow the original.

@user_2832417594

Replying to @vidguide :

Ok thank you!

@user_2832417594

Hi! could you perhaps make this available for a1 mini? Thanks!

The designer has replied

@vidguide

Hi, sure can! I've just enabled/added that now!

@user_2832417594

Replying to @vidguide :

thank you so much!! Have a spectacular day!

@PAUL_LOL

Print Profile

AMS Colored, with Supports - 0.2mm layer, 15% infill

Gut, aber unnötige Farbwechsel

The designer has replied

@vidguide

I can probably fix that. I’ll update the profile in a minute

(Edited)

@vidguide

Thanks for the feedback. Print profile has been updated. Both legs now change colour at the same time, and the beak material is optimised. Shaves about 1 hour off the print time.

(Edited)

@user_2832417594

Heya! Sorry to bother you again, but do you remember what type of manner you used for the goose’s bill?

The designer has replied

@vidguide

No bother at all! I believe it was either a 6x2mm or 8x3mm magnet, I can't recall which one, I have a collection of both. I guess the 6x2 will fit either way, so probably the safest bet.