This is a design by me, transformed into a filamentpainting using Hueforge.
If you scale it, dot change the height of the image
You don't need a AMS to print this, but it makes it alot easier

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA Esun LightBlue Transmission Distance: 3.5
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #5 (0.56mm) swap to BambuLab Green
At layer #7 (0.72mm) swap to Space Blue
At layer #9 (0.88mm) swap to Ivory White for the rest.