Edited the Main Body to include a hole to make it easier to mount to the X carriage. made all the M3 holes a tad bit smaller since they were all a little too loose for me. I also increased the thickness at the top on the wire restraint since it didnt allow for a tight enough hold when zip tied and made the top 5015 hole larger for a proper m4 bolt. I added a version for a noctua fan with the wire channel moved to the bottom.
Edited the standard EZABLE mount to move it a bit closer to the nozzle since there was room. offset should now be -41 x and -10 Y.
Included a honeycomb fan cover with screw holes
Update: added a clamp file as I found that was a little loose on my ender 3, so I norrowed the groove by .25 mm
Printer:
Elegoo Mars
Rafts:
No
Supports:
Yes
Resolution:
.05
charcoal gray
Notes:
I printed the main body and EZABL mount on my elegoo mars so I didnt have to worry about any issues with heat warping the parts. Fan Grill was printed With Atomic Filament Gun Metal Gray.