Gridfinity Caliper Hanger for Bambu X1 Carbon

Gridfinity caliper hanger. For the top/side of a Bambu Lab X1-Carbon. Also, hold a large glue stick or other similar objects.

Measurements designed for Gridfinity baseplate for Bambu X1 Carbon
https://makerworld.com/en/models/78362#profileId-82592 

It should hang well from the edge square of most gridfinity plates.

Material: Bambu PLA Basic Black.

Supports: Yes, requires supports.

Print Settings:

Bambu Lab X1 Carbon 0.4 nozzle

0.16mm Optimal layer height

2 walls

15% infill

How can you support our work?

If you like our work, and want to support it, buy us a coffee at: https://www.buymeacoffee.com/jinivus